Avanti Go Cup Replacement Lid

Keep your Avanti GoCup in perfect working order with the Avanti GoCup Replacement Lid. This replacement lid ensures a tight seal, preventing leaks and spills, so you can continue to enjoy your favorite beverages on the go.

Use & Care

To clean your Avanti Go Cup, hand wash all parts with warm, soapy water after every use, as dishwashers are not recommended. Disassemble the lid by flipping the top cap back, pushing the clear center silicone area upwards from the bottom, and sliding the cap out towards the edge. Daily Cleaning

1. Remove the Lid: Twist and lift the lid completely off the cup.
2. Disassemble the Lid: Flip the flip-top cap open. From the bottom of the lid, push the central clear silicone/hinge area upwards. On the topside, slide the cap out towards the edge of the lid to separate it completely.
3. Wash: Wash the cup body, lid, cap, and inner seal thoroughly in warm, soapy water using a bottle brush.
4. Dry: Allow all parts to air dry completely before reassembling. Store the cup with the lid off and the sealing clip open

Deep Cleaning (Removing Stains & Odors)

Coffee oils and tea tannins can leave films and lingering odors on silicone seals and stainless steel. To eliminate tough buildup: [ 1 ]

• Vinegar Soak: Fill the cup with a 50/50 mixture of warm water and white vinegar, let it soak for a few hours or overnight, and rinse thoroughly.
• Baking Soda Paste: Make a paste of baking soda and a little water, scrub the inside of the cup with a sponge, and rinse well.
• Brightening Seals: Soak any discolored rubber seals in a mixture of 1 part bleach and 10 parts water for 10 to 15 minutes, then rinse exceptionally well

+7

+7

+5